Wednesday, June 12, 2013

The Hen House

We have chickens so we needed a hen house.
Here we have a wall and a floor. Jake is checking out the faux wood vinyl flooring. I know sort of crazy, but I promise, it makes cleaning much easier. We put it down so that it would be under the side walls to keep things from getting under it.

Two walls with giant window holes.

One day FabHub came home and found this had happened to the temporary chicken house.
The wind picked up that whole thing and flipped it.
The chickens had spent part of the day enjoying their freedom and were under the red building when he got home. Luckily they had been out roaming enough that they knew where to go for safety. They were a bit skittish about going back in there that night. Their house blew away, I don't blame them.

Before the roof went on we added hardware cloth to close the roof vents on both the upper and lower sides of the roof. The part that is nailed to the plywood will be covered with siding when we do get that sawmill lumber. The wire is put there to keep any creatures from climbing into the building. It will also keep birds wild birds from having easy access to the chicken food.

Then the roof went on. Work in progress in this picture. It also still needs the rain gutter. I want to collect the fresh water for them to have when they are locked up. The hens will eventually be out in the woods quite a bit, but at night and while we are away they will be confined to the building and the fenced yard.

Then the windows went in.
Why are the boards on the door?

Because there are 19 curious creatures willing to take up residence.

The goats checked out the construction a few times before they were blocked out.

Then we put up the perimeter fence.
And added the black weed block as a sun shade.
And added some fence wire over the top to keep in flying escapees.
And added some more fence wire and sun shade over the top to keep in creative escapees.
And then some more fence wire over the top for those highly focused escapees.
Now it looks a mess, but it will get fixed up when we don't have so many potential escapees. One other thing we need to add is some hardware cloth over the screened part of the windows. Adding it now will also mean the edges are under that siding when it gets put on. The regular window screen won't keep a determined intruder out.

The inside is very roomy for the five or six chickens that we will be keeping. There is lots of light, fresh air and space. This winter when they don't want to go out so much there will be plenty of space for them to stay in, watch it snow, drink some tea, and maybe do some knitting. I am currently using grass clippings as bedding. Between it and the vinyl flooring clean up is very easy. Yes, I need to do that.
The roosts are angled into the bottom of the windows at the moment. They need to be fixed so that one side has two tiers of roost poles and the other side has a couple of nest boxes. Right now there are too many chickens in there to limit the space and the hens aren't laying yet so the boxes would just become roosts and we don't want them to learn that habit. So that is another upgrade to be added.

That is the hen house. If you look closely at the bottom of the picture below you can see where the chickens new hiding spot is. We had originally closed them off from being under the building, but the shade and grass under there was something they deserved to have access to and now they do. Normally, they would be out under the sunshade, but when I got home today they were all under the building. 

When it comes to the wood that went into this particular building, it ended up being one of the most expensive that we have out here on the farm. It was supposed to get the normal saw mill lumber like everything else has around here, but the timing for that didn't work out. So we ended up buying the 2x4s. There aren't really that many, but when you figure we haven't purchased hardly any for any of the other buildings, it adds up quickly. Personally, I think the chickens will appreciate it. 

No comments:

Post a Comment